User Tools

Site Tools


Sidebar

Southern Hog Control
Main Web Site


Follow us on: Facebook, Twitter, and YouTube


Information - Dokuwiki


wiki:camera:3g:misc:sms_codes

SMS COMMAND CODE LIST

Ensure the SMS Switch is ON in order for the camera to receive text commands. The M.I.N.E™ Cam is able to receive text commands from up to four phone numbers to perform these 22 different functions remotely. All four phone numbers have the ability to send and receive SMS commands to control the camera.

• Change Send Mode: Instant *140#0#

  Response: Send instant photo 

• Change Send Mode: Daily Report *140#1#

  Response: Send daily report 

• Change Send Off *140#2#

  Response: Send is off 

• Change Send Via: MMS *120#0#

  Response: Send via mms. 

• Change Send Via: Internet *120#1#

  Response: Send via Internet 

• Change Send To: Phone *130#0#

  Response: Send phone. 

• Change Send To: Email *130#1#

  Response: Send to email 

• Change Send To: Both *130#2#

  Response: Send to both. 

• Add Recipient: Phone Number *100#7065551212#

  Response: Phone number added 

• Delete Recipient: Phone Number *101#7065551212#

  Response: Phone number deleted 

• Add Recipient: Email Address *110#joe@me.com#

  Response: Email added 

• Delete Recipient: Email Address *111#joe@me.com#

  Response: Email deleted 

• Close M.I.N.E.™ Gate *777#

  Response: RF triggered 

• Change Camera Mode: Photo *200#0#

  Response: Set to photo mode 

• Change Camera Mode: Video *200#1#

  Response: Set to video mode 

• Take a Photo and Send Now *500#

  Response: Picture sending  

• Check Cellular Antenna Signal *150#

  Response: Signal: 
  The signal is very weak/ 
  The signal is weak/ 
  The signal is good/   
  The signal is very good 

• Check Battery Strength *201#

  Response:  Battery Level 1 to 5 (low to high) 

• Set PIR Level to High *202#0#

  Response:  PIR sensitivity high 

• Set PIR Level to Normal *202#1#

  Response:  PIR sensitivity normal 

• Set PIR Level to Low *202#2#

  Response:  PIR sensitivity low 

• Set PIR Level to Off *202#3#

  Response:  PIR sensitivity off 


.

wiki/camera/3g/misc/sms_codes.txt · Last modified: 2021/12/15 12:07 (external edit)