===== PIR Tab: =====
 
**• Sensitivity** \\
Passive Infrared (PIR) Trigger Sensitivity \\
**High:** The most sensitive setting and will trigger camera operation when any movement is detected. \\
**Low:** The least sensitive setting used when foliage, wind or shadows trigger excessive photos. \\
**Normal:** Average sensitivity. **(Recommended)** \\

**• Trigger Interval** \\
The timeout period between PIR triggers  
for each photo or video capture. **We recommend a two minute trigger interval**. A one minute selection may not allow a photo to transmit via SMS in low signal areas before the next PIR trigger. The photo is always saved on the SD card but may 
not have time to send via SMS to your phone or email. \\

**• Time Lapse** \\
**OFF:** Camera triggers only during PIR event. **(Recommend)** \\
**ON:** Camera automatically triggers at selected intervals. \\

**• Start - Stop** \\ 
**OFF:** Camera triggers 24 hours per day. \\
**ON:** Camera only triggers between the **START** and **STOP**  
times programmed. Could be used to avoid high traffic from 
non-target species during specified times. \\

{{ :wiki:camera:mine:cam_menu:pir-tab.png?nolink |}}

----
----

{{backlinks>.}}