===== INITIAL SD CARD PROGRAMMING ===== 1. Open the camera. \\ 2. Insert an activated SIM card and formatted SD card into the appropriate camera slots. \\ 3. Move the selector switch from **OFF** to **SETUP**. \\ 4. The screen will display **Checking** then **Searching**. \\ 5. Press the **MENU** button during this connecting sequence. \\ 6. Using the arrow buttons, scroll right to the **GSM** tab. Then scroll 2 clicks up until the **Download Tool** option is visible. \\ {{ :wiki:camera:mine:installation:initial-prog-sd-card-1.png?nolink&200 |}} 7. Press **OK** to **SAVE** the UOV Setup tool to the SD card. The screen will revert back to the initial display. \\ 8. Turn off the camera and eject the SD card. Insert it into a computer SD card slot to program.\\ {{ :wiki:camera:mine:installation:initial-prog-sd-card-2.png?nolink&500 |}} 9. Open the SD card file and two folders should appear; DCIM and GSMSETUP. Right-click on the GSMSETUP file and choose “Extract All…”. {{ :wiki:camera:mine:installation:initial-prog-sd-card-3.png?nolink&500 |}} NOTE: Change the folder name by deleting GSMSETUP from the text box. Only the drive letter of the SD card should remain (see example below). \\ {{ :wiki:camera:mine:installation:initial-prog-sd-card-4.png?nolink&500 |}} 10. Click the “Extract” button. \\ 11. The three items below should appear in the SD card file. \\ {{ :wiki:camera:mine:installation:initial-prog-sd-card-5.png?nolink&500 |}} 12. Double click on the “UOV Setup” file and the below screen should appear. \\ {{ :wiki:camera:mine:installation:initial-prog-sd-card-6.png?nolink |}} {{ :wiki:camera:mine:installation:initial-prog-sd-card-7.png?nolink |}} • **Send Mode** \\ **Instant: (Recommended)** \\ The camera sends a photo immediately when it takes a photo. \\ It will only send an SMS text message of the sequence number when a video is taken (Video: 3/99). \\ The Max Num field indicates the maximum number of photos or texts allowed to be sent within 24 hours. \\ The camera resets to zero each night at 0000 hours. Daily Report: Sends an SMS to tell how many photos and videos were captured during the past 24 hours. \\ In photo mode, the SMStells the accumulated picture quantity together with the latest captured picture. \\ In video mode, the SMS tells the accumulated video quantity only.\\ **Off:** GSM function is de-activated. Photos and videos will not be sent to a recipient but will be saved to the SD card. \\ **• Send Via MMS: (Recommended)** \\ The image will be sent by text message. The image can be sent to a cell phone, email account or both. When checked, a minimum of one phone number and/or one email address needs to be entered as a recipient depending on the Send To mode chosen. \\ **GPRS:** Allows the sending of pictures via Internet connection. This requires a data plan on the SIM card account. The image is sent to an email address only. When checked, a minimum of one email address needs to be entered as a recipient. \\ SMTP parameters need to be set up by clicking Email Set.\\ **• SMS Switch:** The SMS Switch must be ON for the camera to receive text commands from four listed phone numbers. {{ :wiki:camera:mine:installation:initial-prog-sd-card-8.png?nolink |}} **• Operator Parameter** \\ Choose the country and GSM wireless carrier of the SIM card. **Custom** must be selected if an AT&T or T-Mobile SIM card is NOT used. Click **Custom** and manually input the parameters for the URL, APN, IP and Port according to the alternate GSM service provider settings. AT&T or T-Mobile settings are automatic. Users must contact their network service provider for the required settings of all other GSM wireless carriers. Verizon, Sprint and Virgin Mobile use CDMA technology and will not operate in this camera. \\ **• Send To Phone: (Recommended)** \\ A text photo will arrive to a cell phone much faster than an email will arrive to either a cell phone or computer provided the cell phone has good reception. A phone number must appear in **Recipients**. \\ **Email:** The image will be sent to email. An email address must appear in **Recipients**.\\ **Both:** The image will be sent to both a cell phone and an email address. A cell phone number and an email address must appear in **Recipients**. \\ **• Recipients** \\ A maximum of 4 phone numbers and/or 4 email addresses may be added in the **Recipients** field. \\ **NOTE: Use a semi colon to separate more than one email or phone number. Do not leave any spaces between numbers and semi colons. Ensure a semi colon is NOT used at the end. (i.e. 7064456789;3344453456;2123450987)** **Rename** \\ When ON, up to eight letters can be entered in the field on the right such as the example above. The name appears on every photo which makes it easier to identify each camera site when multiple cameras are being used. **Max Size** \\ The allowable range is 60-200KB. We recommend 80KB as larger files take longer to transmit and receive via SMS. Photos are saved at 3, 5 or 8 megapixels on the SD card. **Path** \\ The SD card folder must be selected. If not selected, browse and click the SD card main drive root directory. Do not enter any sub folders inside the SD card main directory. Click **OK** when ready. \\ 13. Click **OK** when you see a pop up window stating the PROFILE.BIN has been saved onto the SD card. {{ :wiki:camera:mine:installation:initial-prog-sd-card-10.png?nolink |}} {{ :wiki:camera:mine:installation:initial-prog-sd-card-11.png?nolink |}} **SD Card Programming Complete** \\ The SD card has been properly programmed when an icon named PROFILE.BIN is visible on the SD card screen. \\ {{ :wiki:camera:mine:installation:initial-prog-sd-card-12.png?nolink |}} **NOTE: Click on “This program installed correctly” if the above pop up window appears after step 13.** \\ 14. Eject SD card from the computer and insert into camera. \\ 15. Move the selector switch from **OFF** to **SETUP**. The camera screen will display “Update Success” after 2 or 3 seconds. \\ ---- ---- {{backlinks>.}}