The M.I.N.E.™ Cam is able to receive text commands from four phone numbers to perform various functions remotely. The SMS Switch must be ON for the camera to receive these text commands. The phone number in position one is the Commander and has the ability to add/delete subordinate phone numbers and emails via text. The Commander and all three subordinates have the ability to send SMS commands to control the camera. The below text commands must be sent to the camera’s SIM card phone number.

• Change Send Mode: Instant - #100#i#75#

  Response: The send mode is instant, max number is 75.

• Change Send Mode: Daily Report - #100#dr#18#30#

  Response: The send mode is daily report, time is 18:30.

• Change Send Via: MMS - #101#mms#

  Response: The send via is mms.

• Change Send To: Phone - #102#phone#

  Response: The send to is phone.

• Change Send To: Email - #102#email#

  Response: The send to is email.

• Change Send To: Both - #102#both#

  Response: The send to is both.

• Add Recipient: Phone Number - #140#1#7065551212#

  Response: 7065551212 added!

• Delete Recipient: Phone Number - #140#0#7065551212#

  Response: 7065551212 deleted!

• Add Recipient: Email Address - #141#1#joe@me.com#

  Response: joe@me.com added!

• Delete Recipient: Email Address: - #141#0#joe@me.com#

  Response: joe@me.com deleted!

• Turn SMS Switch: ON - #200#on#

  Response: gsm is waked up.

• Turn SMS Switch: OFF - #200#off#

  Response: gsm enters sleeping mode.

• Close M.I.N.E.™ Gate - #210#

  Response: Impulse control

• Change Camera Mode: Photo - #310#p#

  Response: The current mode is photo.

• Change Camera Mode: Video - #310#v#

  Response: The current mode is video.

• Take a Photo and Send Now - #500#

  Response: UM532 photo 

• Check Cellular Antenna Signal - #520#

  Response: Signal: normal

• Check Battery Strength - #521#

  Response: Battery: 9 (9 is full charge)

---

---

.