~~DISCUSSION:off~~

INSTALLING CONTROL BOX

Place the control box onto the frame in this position.
Be careful not to pinch the solar panel polarized plug against the frame.
Align the slots and gently snap the clevis onto the actuator arm.
Secure the rod adapter with pliers. Turn the set screw with a 3/32 Allen wrench to break the Loctite seal at threads.
Ensure the control box is tight against the trigger assembly. Using a 3/8” nut driver and drill, secure the control box to the frame with four #14 self tapping, 3/4” long screws.

---

---

.