This shows you the differences between two versions of the page.
|
wiki:camera:3g:misc:care [2015/06/30 08:22] |
wiki:camera:3g:misc:care [2021/12/15 12:07] (current) |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ===== CARE AND MAINTENANCE ===== | ||
| + | **Exterior** \\ | ||
| + | 1. Inspect the outside of the camera body for any cracks which may cause water or moisture damage to electronics.\\ | ||
| + | 2. Check for condensation in both IR LED bank covers.\\ | ||
| + | 3. Ensure the antenna is not loose, bent, broken or cracked.\\ | ||
| + | 4. Wipe excess dirt from camera lens with a soft cloth and use a moist cotton swab with rubbing alcohol to thoroughly clean.\\ | ||
| + | 5. Apply even pressure to camera face and main body housing when closing to ensure proper alignment of waterproof seal. \\ | ||
| + | 6. Ensure the latch is tightly securing the camera housing.\\ | ||
| + | 7. Clean inside the ambient light sensor port and PIR cover.\\ | ||
| + | 8. Inspect the DC and USB port covers for dry rot and damage. | ||
| + | |||
| + | {{ : | ||
| + | |||
| + | **WARNING!** The DC Port plug must be removed before accessing | ||
| + | camera functions. Opening the camera while the external battery is plugged into the housing port may result in damage to both the camera and the external battery. | ||
| + | |||
| + | **WARNING!** Removing screws from internal camera ports will damage electronic components and void the warranty. | ||
| + | |||
| + | ---- | ||
| + | ---- | ||
| + | |||
| + | {{backlinks> | ||