The long range transmitter will
send a wireless signal 250 meters
(or 275 yards) to the control box
receiver. This device uses a 12
volt alkaline A23 battery.
Turn the transmitter over and slide
the housing cover down to expose
the battery compartment.
Replace the A23 battery with the
positive terminal facing right and
the negative terminal facing left
towards the spring.
Return the housing cover to secure
the battery compartment. The red
light should emit when the button
is pushed for 1 second. Test the
control box receiver and M.I.N.E.™
Gate trigger assembly for
operation after replacing battery.