User Tools

Site Tools


This Wiki

Follow us on: Facebook, Twitter, and YouTube



Our 3G camera is designed to test program settings and SIM card service by manually sending a photo. Move the selector switch from OFF to SETUP. Allow the camera 30 seconds to search the wireless 3G network. AT&T will appear in the top center of the LCD screen after connecting. Pressing the OK button will immediately capture a photo and upload the image to the network by following the camera program settings.

The automatic commands displayed in the bottom center of the LCD screen are first “Setting”, then “Uploading”, then “Sending” followed by “Sent”. This process should take approximately 20 seconds to upload and send the photo from the camera and another 10 seconds to receive the photo as an SMS text to a programmed phone when the 3G signal is strong.

If you have any questions, refer to the JAGER PRO™ M.I.N.E. & I.C.E. (3G) Camera Operations Video at the 12 minute and 45 second mark, MAIN MENU TABS for more information.

Permalink wiki/camera/3g/installation/sending_photos.txt · Last modified: 2015/06/30 14:38 by admin