User Tools

Site Tools

Sidebar

This Wiki


Follow us on: Facebook, Twitter, and YouTube

wiki:mine_trap:installation:control_box:antenna_mount

MOUNTING ANTENNA TO CONTROL BOX

Carefully feed the antenna through
the rubber grommet without
damaging the receiver inside the
control box.
Feed the antenna wire through the
1/8” diameter antenna tube until it
clears the opposite end.
Slide the antenna tube into the
rubber grommet until it becomes
visible inside the control box. This
waterproof seal with help keep
electrical components clean and
dry during field use.
The antenna wire in this position
rests between two horizontal gate
frames and will receive a wireless
signal from 250 meters (or 275
yards) when using the long range
transmitter.


Permalink wiki/mine_trap/installation/control_box/antenna_mount.txt · Last modified: 2015/05/25 09:58 by admin

oeffentlich