User Tools

Site Tools

Sidebar

This Wiki


Follow us on: Facebook, Twitter, and YouTube

wiki:mine_trap:installation:control_box:connect_rod

ATTACHING CONNECTING ROD TO LATCH

Notice the actuator arm has more than one inch of travel. The actuator arm and connecting rod is shown below fully “IN” and fully “OUT”. Do not secure the rod to the latch with the connecting arm all the way out or it will hit the bracket on the latch assembly when triggered.


The illustrations below show the proper setting on the right side of the bracket. Using a 3/32 Allen wrench, turn the set screw inside the rod adapter to secure the connecting rod to the



Permalink wiki/mine_trap/installation/control_box/connect_rod.txt · Last modified: 2015/05/25 09:57 by admin

oeffentlich