User Tools

Site Tools


wiki:camera:3g:installation:sending_photos

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

wiki:camera:3g:installation:sending_photos [2015/06/30 14:38]
wiki:camera:3g:installation:sending_photos [2021/12/15 12:07] (current)
Line 1: Line 1:
 +===== MANUALLY SENDING PHOTO =====
 + 
 +Our 3G camera is designed to test program settings and SIM card service  
 +by manually sending a photo. Move the selector switch from OFF to SETUP.  
 +Allow the camera 30 seconds to search the wireless 3G network. AT&T will  
 +appear in the top center of the LCD screen after connecting. Pressing the  
 +OK button will immediately capture a photo and upload the image to the  
 +network by following the camera program settings. \\ 
 +
 +The automatic commands displayed in the bottom center of the LCD screen  
 +are first “Setting”, then “Uploading”, then “Sending” followed by “Sent”.  This  
 +process should take approximately 20 seconds to upload and send the photo  
 +from the camera and another 10 seconds to receive the photo as an SMS  
 +text to a programmed phone when the 3G signal is strong.\\
 +
 +<HTML>
 +<p>
 +If you have any questions, refer to the <a href="https://www.youtube.com/watch?v=dmOLjvWgUjE" target="_blank" class="urlextern" title="JAGER PRO™ M.I.N.E. & I.C.E. (3G) Camera Operations Video">JAGER PRO™ M.I.N.E. & I.C.E.  
 +(3G) Camera Operations Video</a> at the 12 minute and 45 second mark, MAIN MENU TABS for more  
 +information.
 +</p>
 +</HTML>
 +
 +----
 +----
 +
 +{{backlinks>.}}