This shows you the differences between two versions of the page.
wiki:camera:3g:misc:care [2015/06/30 08:22] |
wiki:camera:3g:misc:care [2021/12/15 12:07] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ===== CARE AND MAINTENANCE ===== | ||
+ | **Exterior** \\ | ||
+ | 1. Inspect the outside of the camera body for any cracks which may cause water or moisture damage to electronics.\\ | ||
+ | 2. Check for condensation in both IR LED bank covers.\\ | ||
+ | 3. Ensure the antenna is not loose, bent, broken or cracked.\\ | ||
+ | 4. Wipe excess dirt from camera lens with a soft cloth and use a moist cotton swab with rubbing alcohol to thoroughly clean.\\ | ||
+ | 5. Apply even pressure to camera face and main body housing when closing to ensure proper alignment of waterproof seal. \\ | ||
+ | 6. Ensure the latch is tightly securing the camera housing.\\ | ||
+ | 7. Clean inside the ambient light sensor port and PIR cover.\\ | ||
+ | 8. Inspect the DC and USB port covers for dry rot and damage. | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | **WARNING!** The DC Port plug must be removed before accessing | ||
+ | camera functions. Opening the camera while the external battery is plugged into the housing port may result in damage to both the camera and the external battery. | ||
+ | |||
+ | **WARNING!** Removing screws from internal camera ports will damage electronic components and void the warranty. | ||
+ | |||
+ | ---- | ||
+ | ---- | ||
+ | |||
+ | {{backlinks> |