This shows you the differences between two versions of the page.
wiki:camera:mine:cam_menu:pir_tab [2015/06/29 09:48] |
wiki:camera:mine:cam_menu:pir_tab [2021/12/15 12:07] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ===== PIR Tab: ===== | ||
+ | |||
+ | **• Sensitivity** \\ | ||
+ | Passive Infrared (PIR) Trigger Sensitivity \\ | ||
+ | **High:** The most sensitive setting and will trigger camera operation when any movement is detected. \\ | ||
+ | **Low:** The least sensitive setting used when foliage, wind or shadows trigger excessive photos. \\ | ||
+ | **Normal:** Average sensitivity. **(Recommended)** \\ | ||
+ | **• Trigger Interval** \\ | ||
+ | The timeout period between PIR triggers | ||
+ | for each photo or video capture. **We recommend a two minute trigger interval**. A one minute selection may not allow a photo to transmit via SMS in low signal areas before the next PIR trigger. The photo is always saved on the SD card but may | ||
+ | not have time to send via SMS to your phone or email. \\ | ||
+ | |||
+ | **• Time Lapse** \\ | ||
+ | **OFF:** Camera triggers only during PIR event. **(Recommend)** \\ | ||
+ | **ON:** Camera automatically triggers at selected intervals. \\ | ||
+ | |||
+ | **• Start - Stop** \\ | ||
+ | **OFF:** Camera triggers 24 hours per day. \\ | ||
+ | **ON:** Camera only triggers between the **START** and **STOP** | ||
+ | times programmed. Could be used to avoid high traffic from | ||
+ | non-target species during specified times. \\ | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | ---- | ||
+ | ---- | ||
+ | |||
+ | {{backlinks> |