User Tools

Site Tools

wiki:camera:mine:installation:sms_codes

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

wiki:camera:mine:installation:sms_codes [2015/06/29 00:05] (current)
admin created
Line 1: Line 1:
 +===== SMS COMMAND CODES ===== 
  
 +The M.I.N.E.™ Cam is able to receive text commands from four 
 +phone numbers to perform various functions remotely. The SMS 
 +Switch must be ON for the camera to receive these text commands.
 +The phone number in position one is the Commander and has the  ​
 +ability to add/delete subordinate phone numbers and emails via text. 
 +The Commander and all three subordinates have the ability to send 
 +SMS commands to control the camera. The below text commands ​
 +must be sent to the camera’s SIM card phone number. ​
 +
 +• Change Send Mode: Instant - #100#i#75#
 +    Response: The send mode is instant, max number is 75.
 +• Change Send Mode: Daily Report - #​100#​dr#​18#​30# ​
 +    Response: The send mode is daily report, time is 18:30.
 +• Change Send Via: MMS - #​101#​mms# ​
 +    Response: The send via is mms.
 +• Change Send To: Phone - #​102#​phone# ​
 +    Response: The send to is phone.
 +• Change Send To: Email - #​102#​email# ​
 +    Response: The send to is email.
 +• Change Send To: Both - #​102#​both# ​
 +    Response: The send to is both.
 +• Add Recipient: Phone Number - #​140#​1#​7065551212#  ​
 +    Response: 7065551212 added!
 +• Delete Recipient: Phone Number - #​140#​0#​7065551212#  ​
 +    Response: 7065551212 deleted!
 +• Add Recipient: Email Address - #​141#​1#​joe@me.com#  ​
 +    Response: joe@me.com added!
 +• Delete Recipient: Email Address: - #​141#​0#​joe@me.com# ​  
 +    Response: joe@me.com deleted!
 +• Turn SMS Switch: ON - #​200#​on# ​
 +    Response: gsm is waked up.
 +• Turn SMS Switch: OFF - #​200#​off# ​
 +    Response: gsm enters sleeping mode.
 +• Close M.I.N.E.™ Gate - #210# 
 +    Response: Impulse control
 +• Change Camera Mode: Photo - #​310#​p#  ​
 +    Response: The current mode is photo.
 +• Change Camera Mode: Video - #​310#​v#  ​
 +    Response: The current mode is video.
 +• Take a Photo and Send Now - #​500#  ​
 +    Response: UM532 photo 
 +• Check Cellular Antenna Signal - #520# 
 +    Response: Signal: normal
 +• Check Battery Strength - #521# 
 +    Response: Battery: 9 (9 is full charge)
 +
 +----
 +----
 +
 +{{backlinks>​.}}
Permalink wiki/camera/mine/installation/sms_codes.txt · Last modified: 2015/06/29 00:05 by admin

oeffentlich