User Tools

Site Tools


Sidebar

Southern Hog Control
Main Web Site


Follow us on: Facebook, Twitter, and YouTube


Information - Dokuwiki


wiki:mine_trap:installation:control_box:install_rods

~~DISCUSSION:off~~

INSTALLING CONNECTING ROD & CLEVIS

Push the 1/8” connecting rod through the plastic clevis.
Slide the connecting rod through the actuator hole
inside the control box.
Align the slots and gently snap the clevis onto
the actuator arm.
Rotate the connecting rod and clevis to this position.
Work the rod back & forth to ensure there is no binding.
NEVER transport the M.I.N.E. Gate with battery
inside the control box or severe damage to
electronics and battery will occur.
Remove battery during transport and always
disconnect when not in use.


.

wiki/mine_trap/installation/control_box/install_rods.txt · Last modified: 2021/12/15 12:07 (external edit)