Differences

This shows you the differences between two versions of the page.

--- wiki:mine_trap:installation:gate [2015/05/25 08:57]
+++ wiki:mine_trap:installation:gate [2021/12/15 12:07] (current)
@@ Line 1: / Line 1: @@
+~~DISCUSSION:off~~
+===== INSTALLING M.I.N.E.™ GATE =====
+Trap shy adult hogs will not step over a threshold. Dig a two-inch trench
+with a hand pick to conceal the bottom gate frame. Use a level to ensure
+the drop gate remains square for smooth operation. Cover the threshold
+with dirt and camouflage to blend with surrounding area.{{:wiki:mine_trap:installation:gate:install-gate-1.png?nolink&200 |}}{{:wiki:mine_trap:installation:gate:install-gate-2.png?nolink&200 |}}
+----
+{{ :wiki:mine_trap:installation:gate:install-gate-3.png?nolink&100|}}The panel joint at the gate support
+post is the weakest link if not secured
+properly. Ensure the panel’s vertical
+/4” steel rods are on the outside of the
+enclosure (against the post) and the
+horizontal steel rods are on the
+inside. Use the post lugs to lock the
+vertical steel rod between the post and
+gate support.
+----
+{{:wiki:mine_trap:installation:gate:install-gate-4.png?nolink&200 |}}Pull these twists as tight as
+possible and reinforce the
+joint with six anchor points of
+double stranded 11 gauge
+galvanized steel wire or a
+single strand of 9 gauge
+galvanized steel wire.
+----
+----
+{{backlinks>.}}

Southern Hog Control