http://southernhogcontrol.net/wiki/ 2026-04-21T08:33:27+00:00 http://southernhogcontrol.net/wiki/ http://southernhogcontrol.net/wiki/lib/tpl/dokuwiki/images/favicon.ico text/html 2021-12-15T12:07:18+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:camera:mine:installation:characteristics?rev=1639588038&do=diff CAMERA CHARACTERISTICS 1. Antenna: Standard antenna shown receives cell tower signals. Our 5 decibel booster antenna is available as an accessory for operation in low signal areas. 2. IR Illuminators: Twin banks using 52 infrared LEDs that illuminate the target area when camera functions at night. text/html 2021-12-15T12:07:18+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:camera:mine:installation:get_started?rev=1639588038&do=diff GETTING STARTED We recommend an AT&T SIM card as their data package has unlimited text and photo messaging for only $19.99 per month. The camera was designed with this concept. It does not matter which cellular company offers the best coverage in your area. Verizon and Sprint network providers use CDMA technology and the camera requires GSM technology (AT&T or T-Mobile) to operate. text/html 2021-12-15T12:07:19+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:camera:mine:installation:quick_setup?rev=1639588039&do=diff CAMERA QUICK SETUP 1. Ensure selector switch is OFF and install 8 new AA lithium batteries according to polarity symbols. 2. Insert an activated SIM card and formatted SD card (32GB or smaller) into the appropriate camera slots. 3. Move the selector switch from OFF to SETUP. text/html 2021-12-15T12:07:19+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:camera:mine:installation:sd_card_program?rev=1639588039&do=diff INITIAL SD CARD PROGRAMMING 1. Open the camera. 2. Insert an activated SIM card and formatted SD card into the appropriate camera slots. 3. Move the selector switch from OFF to SETUP. 4. The screen will display Checking then Searching. 5. Press the text/html 2021-12-15T12:07:19+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:camera:mine:installation:sms_codes?rev=1639588039&do=diff SMS COMMAND CODES The M.I.N.E.™ Cam is able to receive text commands from four phone numbers to perform various functions remotely. The SMS Switch must be ON for the camera to receive these text commands. The phone number in position one is the Commander and has the ability to add/delete subordinate phone numbers and emails via text. The Commander and all three subordinates have the ability to send SMS commands to control the camera. The below text commands must be sent to the camera’s S…