http://southernhogcontrol.net/wiki/ 2026-04-19T11:06:09+00:00 http://southernhogcontrol.net/wiki/ http://southernhogcontrol.net/wiki/lib/tpl/dokuwiki/images/favicon.ico text/html 2021-12-15T12:07:25+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:mine_trap:installation:building_enclosure?rev=1639588045&do=diff ~~DISCUSSION:off~~ BUILDING THE ENCLOSURE Watch our video titled, “M.I.N.E.™ TRAP TRAINING (2)- BUILDING THE ENCLOSURE” for detailed information. NOTE: Video will open in this window. Drive a 7 foot long T-post measuring 12 feet from the feeder. This will become the left support post for the 8 foot wide MINE gate. Put the gate in position to measure and drive the right support post. Measure 20 feet from the rear of the feeder and drive another 7 foot long post to form a 35 foot triang… text/html 2021-12-15T12:07:25+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:mine_trap:installation:camera_mount?rev=1639588045&do=diff ~~DISCUSSION:off~~ INSTALLING T-POST CAMERA MOUNT Align the threads of the T-post mounting bracket to the camera mounting port. Thread bracket no more than three complete rotations our it may damage the camera housing. Tighten securely using the adjusting nut. text/html 2021-12-15T12:07:25+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:mine_trap:installation:control_box?rev=1639588045&do=diff ~~DISCUSSION:off~~ INSTALLING CONTROL BOX Place the control box onto the frame in this position. Be careful not to pinch the solar panel polarized plug against the frame. Align the slots and gently snap the clevis onto the actuator arm. Secure the rod adapter with pliers. Turn text/html 2021-12-15T12:07:25+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:mine_trap:installation:gate?rev=1639588045&do=diff ~~DISCUSSION:off~~ INSTALLING M.I.N.E.™ GATE Trap shy adult hogs will not step over a threshold. Dig a two-inch trench with a hand pick to conceal the bottom gate frame. Use a level to ensure the drop gate remains square for smooth operation. Cover the threshold with dirt and camouflage to blend with surrounding area. text/html 2021-12-15T12:07:26+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:mine_trap:installation:panels?rev=1639588046&do=diff ~~DISCUSSION:off~~ INSTALLING 18-60™ PANELS & POSTS Erect six each 18-60™ panels in a circular shape around the feeder. The opening for the eight foot wide MINE™ gate should face the natural direction hogs travel to the bait site. Each panel is 16 feet long with an eight inch overlap. Posts should be driven in the center of each overlap. text/html 2021-12-15T12:07:26+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:mine_trap:installation:post_clips?rev=1639588046&do=diff ~~DISCUSSION:off~~ INSTALLING M.I.N.E.™ POST CLIPS Secure 18-60™ Panels to posts in seconds using a drill and M.I.N.E.™ Post Clips. Standing inside the trap enclosure, install a post clip (11 gauge) around the post and panel. Insert a M.I.N.E.™ Clip Socket onto the post clip. Press against the panel while drilling clockwise at full speed. text/html 2021-12-15T12:07:26+00:00 Anonymous (anonymous@undisclosed.example.com) http://southernhogcontrol.net/wiki/doku.php/wiki:mine_trap:installation:selection?rev=1639588046&do=diff ~~DISCUSSION:off~~ SITE SELECTION & PRE-BAITING Watch our video titled, “M.I.N.E. TRAP TRAINING (1)- SITE SELECTION & PRE-BAITING” for detailed information. NOTE: Video will open in this window. Erect feeder and secure each leg with a T-post and 11 gauge galvanized steel wire. Ensure solar panel is facing south. Following the steps of our “Capture