Sidebar
wiki:mine_trap:installation:control_box
~~DISCUSSION:off~~
INSTALLING CONTROL BOX
| Place the control box onto the frame in this position. |  |
| Be careful not to pinch the solar panel polarized plug against the frame. |  |
| Align the slots and gently snap the clevis onto the actuator arm. |  |
| Secure the rod adapter with pliers. Turn the set screw with a 3/32 Allen wrench to break the Loctite seal at threads. |  |
| Ensure the control box is tight against the trigger assembly. Using a 3/8” nut driver and drill, secure the control box to the frame with four #14 self tapping, 3/4” long screws. |  |
.
wiki/mine_trap/installation/control_box.txt · Last modified: 2021/12/15 12:07 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
