User Tools

Site Tools

wiki:camera:3g:misc:sms_codes

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wiki:camera:3g:misc:sms_codes [2015/06/28 19:01]
admin
wiki:camera:3g:misc:sms_codes [2015/06/30 08:33] (current)
admin
Line 1: Line 1:
-===== SMS COMMAND ​CODES ===== +===== SMS COMMAND ​CODE LIST ===== 
  
-The M.I.N.E.™ Cam is able to receive text commands from four  +Ensure the SMS Switch is ON in order for the camera to receive text commands. ​The M.I.N.E™ Cam is able to receive text commands from up to four phone numbers to perform ​these 22 different ​functions remotely. ​All four phone numbers have the ability ​to send and receive ​SMS commands ​to control the camera.  
-phone numbers to perform ​various ​functions remotely. ​The SMS  + 
-Switch must be ON for the camera ​to receive ​these text commands. +• Change Send Mode: Instant ​    ​*140#​0#​  
-The phone number ​in position one is the Commander and has the   +    Response: Send instant photo  
-ability ​to add/delete subordinate phone numbers ​and emails via text.  +• Change Send Mode: Daily Report ​  ​*140#​1#​  
-The Commander and all three subordinates have the ability ​to send  +    Response: Send daily report  
-SMS commands ​to control the camera. The below text commands ​ +• Change Send Off      *140#2#  
-must be sent to the camera’s SIM card phone number. ​+    Response: Send is off  
 +• Change Send Via: MMS     ​*120#​0#​  
 +    Response: Send via mms.  
 +• Change Send Via: Internet ​    ​*120#​1#​  
 +    Response: Send via Internet  
 +• Change Send To: Phone     ​*130#​0#​  
 +    Response: Send phone.  
 +• Change Send To: Email     ​*130#​1#​  
 +    Response: Send to email  
 +• Change Send To: Both     ​*130#​2#​  
 +    Response: Send to both.  
 +• Add Recipient: Phone Number ​    ​*100#​7065551212# ​  
 +    Response: Phone number ​added  
 +• Delete Recipient: Phone Number ​    ​*101#​7065551212# ​  
 +    ​Response:​ Phone number deleted  
 +• Add Recipient: Email Address ​     *110#​joe@me.com# ​  
 +    Response: Email added  
 +• Delete Recipient: Email Address ​   *111#​joe@me.com# ​   
 +    Response: Email deleted  
 +• Close M.I.N.E.™ Gate     *777#  
 +    Response: RF triggered  
 +• Change Camera Mode: Photo   ​*200#​0# ​  
 +    Response: Set to photo mode  
 +• Change Camera Mode: Video   ​*200#​1# ​  
 +    Response: Set to video mode  
 +• Take a Photo and Send Now   ​*500# ​   
 +    ​Response:​ Picture sending ​  
 +• Check Cellular Antenna Signal ​  *150#  
 +    Response: Signal:  
 +    ​The signal is very weak/  
 +    The signal is weak/  
 +    The signal is good/    
 +    The signal is very good  
 +• Check Battery Strength ​    *201#  
 +    Response: ​ Battery Level 1 to 5 (low to high)  
 +• Set PIR Level to High     ​*202#​0# ​ 
 +    ​Response: ​ PIR sensitivity high  
 +• Set PIR Level to Normal ​    ​*202#​1#​  
 +    Response: ​ PIR sensitivity normal  
 +• Set PIR Level to Low     ​*202#​2#​  
 +    Response: ​ PIR sensitivity low  
 +• Set PIR Level to Off     ​*202#​3#​  
 +    Response: ​ PIR sensitivity off 
  
-• Change Send Mode: Instant - #100#i#75# 
-    Response: The send mode is instant, max number is 75. 
-• Change Send Mode: Daily Report - #​100#​dr#​18#​30# ​ 
-    Response: The send mode is daily report, time is 18:30. 
-• Change Send Via: MMS - #​101#​mms# ​ 
-    Response: The send via is mms. 
-• Change Send To: Phone - #​102#​phone# ​ 
-    Response: The send to is phone. 
-• Change Send To: Email - #​102#​email# ​ 
-    Response: The send to is email. 
-• Change Send To: Both - #​102#​both# ​ 
-    Response: The send to is both. 
-• Add Recipient: Phone Number - #​140#​1#​7065551212#  ​ 
-    Response: 7065551212 added! 
-• Delete Recipient: Phone Number - #​140#​0#​7065551212#  ​ 
-    Response: 7065551212 deleted! 
-• Add Recipient: Email Address - #​141#​1#​joe@me.com#  ​ 
-    Response: joe@me.com added! 
-• Delete Recipient: Email Address: - #​141#​0#​joe@me.com# ​   
-    Response: joe@me.com deleted! 
-• Turn SMS Switch: ON - #​200#​on# ​ 
-    Response: gsm is waked up. 
-• Turn SMS Switch: OFF - #​200#​off# ​ 
-    Response: gsm enters sleeping mode. 
-• Close M.I.N.E.™ Gate - #210#  
-    Response: Impulse control 
-• Change Camera Mode: Photo - #​310#​p#  ​ 
-    Response: The current mode is photo. 
-• Change Camera Mode: Video - #​310#​v#  ​ 
-    Response: The current mode is video. 
-• Take a Photo and Send Now - #​500#  ​ 
-    Response: UM532 photo  
-• Check Cellular Antenna Signal - #520#  
-    Response: Signal: normal 
-• Check Battery Strength - #521#  
-    Response: Battery: 9 (9 is full charge) 
  
 ---- ----
Permalink wiki/camera/3g/misc/sms_codes.txt · Last modified: 2015/06/30 08:33 by admin

oeffentlich