This shows you the differences between two versions of the page.
wiki:camera:mine:installation:sd_card_program [2015/06/29 09:24] |
wiki:camera:mine:installation:sd_card_program [2021/12/15 12:07] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ===== INITIAL SD CARD PROGRAMMING ===== | ||
+ | |||
+ | 1. Open the camera. \\ | ||
+ | 2. Insert an activated SIM card and formatted SD card into the | ||
+ | appropriate camera slots. \\ | ||
+ | 3. Move the selector switch from **OFF** to **SETUP**. \\ | ||
+ | 4. The screen will display **Checking** then **Searching**. \\ | ||
+ | 5. Press the **MENU** button during this connecting sequence. \\ | ||
+ | 6. Using the arrow buttons, scroll right to the **GSM** tab. Then | ||
+ | scroll 2 clicks up until the **Download Tool** option is visible. \\ | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | 7. Press **OK** to **SAVE** the UOV Setup tool to the SD card. The | ||
+ | screen will revert back to the initial display. \\ | ||
+ | 8. Turn off the camera and eject the SD card. Insert it into a | ||
+ | computer SD card slot to program.\\ | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | 9. Open the SD card file and two folders should appear; DCIM | ||
+ | and GSMSETUP. Right-click on the GSMSETUP file and | ||
+ | choose “Extract All…”. | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | NOTE: Change the folder name by deleting GSMSETUP from | ||
+ | the text box. Only the drive letter of the SD card should remain | ||
+ | (see example below). \\ | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | 10. Click the “Extract” button. \\ | ||
+ | 11. The three items below should appear in the SD card file. \\ | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | 12. Double click on the “UOV Setup” file and the below screen | ||
+ | should appear. \\ | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | • **Send Mode** | ||
+ | **Instant: (Recommended)** \\ The camera sends a photo immediately when it takes a photo. \\ It will only send an SMS text message of the sequence number when a video is taken (Video: 3/99). \\ The Max Num field indicates the maximum | ||
+ | **Off:** GSM function is de-activated. Photos and videos will not | ||
+ | be sent to a recipient but will be saved to the SD card. \\ | ||
+ | |||
+ | **• Send Via MMS: (Recommended)** \\ | ||
+ | The image will be sent by text | ||
+ | message. The image can be sent to a cell phone, email | ||
+ | account or both. When checked, a minimum of one phone | ||
+ | number and/or one email address needs to be entered as a | ||
+ | recipient depending on the Send To mode chosen. \\ | ||
+ | **GPRS:** Allows the sending of pictures via Internet connection. | ||
+ | This requires a data plan on the SIM card account. The image | ||
+ | is sent to an email address only. When checked, a minimum of | ||
+ | one email address needs to be entered as a recipient. \\ | ||
+ | SMTP parameters need to be set up by clicking Email Set.\\ | ||
+ | |||
+ | **• SMS Switch:** The SMS Switch must be ON for the camera | ||
+ | to receive text commands from four listed phone numbers. | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | **• Operator Parameter** \\ | ||
+ | Choose the country and GSM wireless carrier of the SIM card. | ||
+ | **Custom** must be selected if an AT&T or T-Mobile SIM card is | ||
+ | NOT used. Click **Custom** and manually input the parameters | ||
+ | for the URL, APN, IP and Port according to the alternate | ||
+ | GSM service provider settings. AT&T or T-Mobile settings are | ||
+ | automatic. Users must contact their network service provider | ||
+ | for the required settings of all other GSM wireless carriers. | ||
+ | Verizon, Sprint and Virgin Mobile use CDMA technology and | ||
+ | will not operate in this camera. \\ | ||
+ | |||
+ | **• Send To Phone: (Recommended)** \\ A text photo will arrive to a cell | ||
+ | phone much faster than an email will arrive to either a | ||
+ | cell phone or computer provided the cell phone has good | ||
+ | reception. A phone number must appear in **Recipients**. \\ | ||
+ | **Email:** The image will be sent to email. An email address | ||
+ | must appear in **Recipients**.\\ | ||
+ | **Both:** The image will be sent to both a cell phone and an | ||
+ | email address. A cell phone number and an email address | ||
+ | must appear in **Recipients**. \\ | ||
+ | |||
+ | **• Recipients** \\ | ||
+ | A maximum of 4 phone numbers and/or 4 email addresses | ||
+ | may be added in the **Recipients** field. \\ | ||
+ | **NOTE: Use a semi colon to separate more than one email | ||
+ | or phone number. Do not leave any spaces between | ||
+ | numbers and semi colons. Ensure a semi colon is NOT | ||
+ | used at the end. (i.e. 7064456789; | ||
+ | |||
+ | **Rename** \\ | ||
+ | When ON, up to eight letters can be entered in the field on the | ||
+ | right such as the example above. The name appears on every | ||
+ | photo which makes it easier to identify each camera site when | ||
+ | multiple cameras are being used. | ||
+ | |||
+ | **Max Size** \\ | ||
+ | The allowable range is 60-200KB. We recommend 80KB | ||
+ | as larger files take longer to transmit and receive via SMS. | ||
+ | Photos are saved at 3, 5 or 8 megapixels on the SD card. | ||
+ | |||
+ | **Path** \\ | ||
+ | The SD card folder must be selected. If not selected, browse | ||
+ | and click the SD card main drive root directory. Do not enter | ||
+ | any sub folders inside the SD card main directory. Click **OK** | ||
+ | when ready. \\ | ||
+ | |||
+ | 13. Click **OK** when you see a pop up window stating the | ||
+ | PROFILE.BIN has been saved onto the SD card. | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | **SD Card Programming Complete** \\ | ||
+ | The SD card has been properly programmed when an icon | ||
+ | named PROFILE.BIN is visible on the SD card screen. \\ | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | **NOTE: Click on “This program installed correctly” if the | ||
+ | above pop up window appears after step 13.** \\ | ||
+ | 14. Eject SD card from the computer and insert into camera. \\ | ||
+ | 15. Move the selector switch from **OFF** to **SETUP**. The camera | ||
+ | screen will display “Update Success” after 2 or 3 seconds. \\ | ||
+ | |||
+ | ---- | ||
+ | ---- | ||
+ | |||
+ | {{backlinks> | ||